关闭 izeldur 打开了这个问题 2017 年 6 月 13 日 · 1条评论 注释 伊泽尔杜尔 评论了 2017 年 6 月 13 日 尝试构建并将 grbl 1.1f 上传到我的 Arduino duemilanove 并出现大草图尺寸错误: avr-objcopy -O ihex -R .eeprom /tmp/build5586395876159723766.tmp/grblUpload.cpp.elf /tmp/build5586395876159723766.tmp/grblUpload.cpp.hex Binary sketch size: 31,046 bytes (of a 30,720 byte maximum) processing.app.debug.RunnerException: Sketch too big; see http://www.arduino.cc/en/Guide/Troubleshooting#size for tips on reducing it. 贡献者 香奈儿 评论了 2017 年 6 月 13 日 默认构建将适合 Duemilanove。如果你添加诸如 CoreXY 或停车之类的东西,你可以超过这个。否则,您可以在 Duemilanove 上刻录 Uno 引导加载程序以释放 1KB。请参阅有关此的 Wiki 常见问题解答。 chamnit已完成 关闭 2017 年 6 月 13 日 喜欢 (0) GRBL 和 I2C?! #254 如何让 GRBL 不进行插值? #255 v1.3.8-EDGE 重启后键盘快捷键消失 #427 关闭 无法在 gsender 1.2.0 中打开 .gcode 文件 #367 RaspberryPi 运行 gsender 时出现问题 #89 向 fluidnc 发送 $$ 会导致 gsender 崩溃 #473 v1.3.8-EDGE 重启后键盘快捷键消失 #427 关闭无法在 gsender 1.2.0 中打开 .gcode 文件 #367RaspberryPi 运行 gsender 时出现问题 #89向 fluidnc 发送 $$ 会导致 gsender 崩溃 #473功能请求:抑制发送到机器的 gcode 中的 gcode 注释。 #444 关闭通过网络连接进行连接 #171操纵杆运动的剩余问题 #204 关闭新版本认为我的机器一直处于锁定状态 #474 关闭
尝试构建并将 grbl 1.1f 上传到我的 Arduino duemilanove 并出现大草图尺寸错误:
avr-objcopy -O ihex -R .eeprom /tmp/build5586395876159723766.tmp/grblUpload.cpp.elf /tmp/build5586395876159723766.tmp/grblUpload.cpp.hex Binary sketch size: 31,046 bytes (of a 30,720 byte maximum)processing.app.debug.RunnerException: Sketch too big; see http://www.arduino.cc/en/Guide/Troubleshooting#size for tips on reducing it.