测试所有示例配置 #1762

安迪普

从今晚活跃开发人员子集之间的讨论中，我们决定检查所有示例配置 a) 启动 b) 运行和 c) 没有严重的图形故障很重要。
检查这个的原因是 Master 分支现在完全转换为 Python 3 和 GTK3，并且 GUI 是更新可能导致问题的主要区域。

以下是所有示例配置的列表。如果您要检查配置，请在“待测试者”栏中添加您的姓名，并将结果（“通过”或“失败”）放在“结果”栏中。在“评论”下添加任何评论（尤其是在失败的情况下）。

配置	接受测试	结果	注释
./阁楼/dallur-thc/dallur-advanced.ini
./阁楼/demo_mazak/demo_mazak.ini
./by_machine/qtplasmac/qtplasmac_s_imperial.ini	菲尔·卡特	经过
./by_machine/qtplasmac/qtplasmac_s_metric.ini	菲尔·卡特	经过
./by_machine/qtplasmac/qtplasmac_l_metric.ini	菲尔·卡特	经过
./by_machine/qtplasmac/qtplasmac_p_imperial.ini	菲尔·卡特	经过
./by_machine/qtplasmac/qtplasmac_l_imperial.ini	菲尔·卡特	经过
./by_machine/qtplasmac/qtplasmac_p_metric.ini	菲尔·卡特	经过
./by_machine/boss/pid_test.ini
./by_machine/boss/boss.ini
./by_machine/scorbot-er-3/scorbot-er-3.ini
./by_machine/tormach/pcnc-770.ini
./by_machine/tormach/pcnc-1100-seriesII.ini
./by_machine/sherline/Sherline4Axis/Sherline4Axis_inch.ini
./by_machine/sherline/Sherline4Axis/Sherline4Axis_mm.ini
./by_machine/sherline/SherlineLathe/SherlineLathe_inch.ini
./by_machine/sherline/SherlineLathe/SherlineLathe_mm.ini
./by_machine/sherline/Sherline3Axis/Sherline3Axis_inch.ini
./by_machine/sherline/Sherline3Axis/Sherline3Axis_mm.ini
./by_machine/cooltool/Uni-fraes-v3.ini
./by_machine/cooltool/Uni-dreh-g.ini
./by_machine/cooltool/Uni-dreh.ini
./by_machine/cooltool/Uni-cnc-set.ini
./by_machine/cooltool/Basic540_4axes.ini
./by_machine/cooltool/Uni-mill-cnc.ini
./by_machine/cooltool/Uni-fraes-h3.ini
./by_machine/cooltool/Uni-fraes-4.ini
./by_machine/cooltool/Basic540_3axes.ini
./by_machine/smithy/1034gecko.ini
./by_machine/smithy/622.ini
./by_machine/smithy/1240combined.ini
./by_machine/smithy/516gecko.ini
./by_machine/smithy/622leadshine_4axis.ini
./by_machine/smithy/1240rutex_4axis.ini
./by_machine/smithy/622keyence.ini
./by_machine/smithy/622leadshine.ini
./by_machine/smithy/1240combined_4axis.ini
./by_machine/smithy/622_4axis.ini
./by_machine/smithy/622gecko.ini
./by_machine/smithy/1240combined_mm.ini
./by_machine/smithy/1240rutex.ini
./by_machine/smithy/924.ini
./by_machine/smithy/1240_4axis.ini
./by_machine/smithy/1240gecko.ini
./by_machine/smithy/1315.ini
./by_machine/smithy/1240.ini
./by_interface/parport/classicladder/demo_step_cl/demo_step_cl.ini
./by_interface/parport/classicladder/cl-estop/cl-estop.ini
./by_interface/parport/plasma-thc-sim/plasma_mm.ini
./by_interface/parport/gantry/gantry_joints.ini
./by_interface/parport/gantry/gantry.ini
./by_interface/parport/etch-servo/etch.ini
./by_interface/parport/stepper-xyza/inch.ini
./by_interface/parport/stepper-gantry/stepper_mm.ini
./by_interface/parport/gecko/Gecko_540B4/Gecko_540B4.ini
./by_interface/parport/gecko/Gecko_540B3/Gecko_540B3.ini
./by_interface/parport/nist-lathe/inch.ini
./by_interface/parport/stepper/sim_inch.ini
./by_interface/parport/stepper/stepper_inch.ini
./by_interface/parport/stepper/stepper_mm.ini
./by_interface/vigilant/vti.ini
./by_interface/pico/USC_encod/univstep.ini
./by_interface/pico/ppmc_vel/ppmc.ini
./by_interface/pico/univpwmv/univpwm.ini
./by_interface/pico/univstep/univstep.ini
./by_interface/pico/ppmc/ppmc.ini
./by_interface/pico/univpwm/univpwm.ini
./by_interface/servotogo/stg.ini
./by_interface/pluto/pluto_inch/pluto_inch.ini
./by_interface/pluto/车床-pluto/车床-pluto.ini
./by_interface/vitalsystems/motenc.ini
./by_interface/mesa/hm2-stepper/5i23.ini
./by_interface/mesa/hm2-stepper/7i43-small.ini
./by_interface/mesa/hm2-stepper/4i68.ini
./by_interface/mesa/hm2-stepper/3×20-small.ini
./by_interface/mesa/hm2-stepper/5i20.ini
./by_interface/mesa/hm2-stepper/4i65.ini
./by_interface/mesa/hm2-stepper/5i22-small.ini
./by_interface/mesa/hm2-stepper/5i22-big.ini
./by_interface/mesa/hm2-stepper/7i90.ini
./by_interface/mesa/hm2-stepper/7i43-big.ini
./by_interface/mesa/hm2-servo/5i23.ini
./by_interface/mesa/hm2-servo/7i43-small.ini
./by_interface/mesa/hm2-servo/4i68.ini
./by_interface/mesa/hm2-servo/3×20-small.ini
./by_interface/mesa/hm2-servo/5i20.ini
./by_interface/mesa/hm2-servo/4i65.ini
./by_interface/mesa/hm2-servo/5i22-small.ini
./by_interface/mesa/hm2-servo/5i22-big.ini
./by_interface/mesa/hm2-servo/7i90.ini
./by_interface/mesa/hm2-servo/7i43-big.ini
./by_interface/mesa/plasma-5i20/plasma-5i20.ini
./by_interface/mesa/plasma-5i20/plasma-demo.ini
./by_interface/general_mechatronics/GM6-PCI/3-axis-stepper.ini
./by_interface/general_mechatronics/GM6-PCI/3-axis-servo.ini
./sim/gmoccapy/tool_sensor.ini
./sim/gmoccapy/plasma_config/gmoccapy_plasma.ini
./sim/gmoccapy/gmoccapy_sim_hardware_button.ini
./sim/gmoccapy/XYZCW.ini
./sim/gmoccapy/non_trivial_kinematics/table-rotary-tilting/xyzac-trt.ini
./sim/gmoccapy/non_trivial_kinematics/Gantry/gantry_mm.ini
./sim/gmoccapy/non_trivial_kinematics/scara/scara.ini
./sim/gmoccapy/gmoccapy_right_panel.ini
./sim/gmoccapy/gmoccapy_XYZAC.ini
./sim/gmoccapy/lathe_configs/lathe.ini
./sim/gmoccapy/lathe_configs/lathe_CW.ini
./sim/gmoccapy/lathe_configs/lathe_imperial.ini
./sim/gmoccapy/lathe_configs/lathe_C.ini
./sim/gmoccapy/lathe_configs/lathe_backtool.ini
./sim/gmoccapy/lathe_configs/lathe_macros.ini	安迪普	经过	~~宏选项卡不显示~~工作中
./sim/gmoccapy/6_axis.ini
./sim/gmoccapy/messages.ini
./sim/gmoccapy/gmoccapy_XYZAB.ini
./sim/gmoccapy/with_user_tabs.ini
./sim/gmoccapy/gmoccapy_tool_sensor.ini
./sim/gmoccapy/7_axis_tool.ini
./sim/gmoccapy/sim_hardware_button.ini
./sim/gmoccapy/gmoccapy.ini	汉斯	经过
./sim/gmoccapy/4_axis.ini
./sim/gmoccapy/gmoccapy_plasma/gmoccapy_plasma.ini
./sim/gmoccapy/gmoccapy_XYZCW.ini
./sim/gmoccapy/9_axis.ini
./sim/gmoccapy/right_panel.ini
./sim/gmoccapy/gmoccapy_messages.ini
./sim/gmoccapy/gmoccapy_4_axis.ini
./sim/gmoccapy/gmoccapy_pedant.ini
./sim/gmoccapy/XYZAB.ini
./sim/gmoccapy/gmoccapy_with_user_tabs.ini
./sim/gmoccapy/gmoccapy_left_panel.ini
./sim/gmoccapy/XYZAC.ini
./sim/gmoccapy/left_panel.ini
./sim/gmoccapy/7_axis.ini
./sim/gmoccapy/8_axis.ini
./sim/tklinuxcnc/servo_sim.ini
./sim/tklinuxcnc/ldelta.ini
./sim/tklinuxcnc/tripod.ini
./sim/tklinuxcnc/trivkins/xz.ini
./sim/tklinuxcnc/trivkins/xz_both.ini
./sim/tklinuxcnc/tklinuxcnc.ini
./sim/axis/ini_with_includes/includes_demo.ini
./sim/axis/classicladder/demo_sim_cl.ini
./sim/axis/minimal_xyz.ini
./sim/axis/ldelta_demo.ini
./sim/axis/gantry/gantry_jjog.ini
./sim/axis/gantry/gantry_mm.ini
./sim/axis/gantry/gantry.ini
./sim/axis/ldelta.ini
./sim/axis/geometry/xyzc_origin.ini
./sim/axis/geometry/xyzc.ini
./sim/axis/halui_pyvcp/halui.ini
./sim/axis/qtvcp/qtvismach_tab.ini
./sim/axis/qtvcp/qtvcp_tab.ini
./sim/axis/external_offsets/dynamic_offsets.ini
./sim/axis/external_offsets/eoffsets.ini
./sim/axis/external_offsets/jwp_z.ini
./sim/axis/external_offsets/opa.ini
./sim/axis/ja_tests/xyzb_locking_indexer/xyyzb.ini
./sim/axis/ja_tests/xyzb_locking_indexer/xyzb.ini
./sim/axis/ja_tests/xz/xz_both_auto.ini
./sim/axis/ja_tests/xz/xz.ini
./sim/axis/ja_tests/xz/xz_both.ini
./sim/axis/ja_tests/xyzx_mpg/xyzx.ini
./sim/axis/ja_tests/xyzx_mpg/xyzx-xhc-hb04.ini
./sim/axis/rdelta.ini
./sim/axis/panelui-demo/_panelui.ini
./sim/axis/panelui-demo/panelui-demo.ini
./sim/axis/spindle_orient/orient.ini
./sim/axis/twopass/twopass.ini
./sim/axis/pentapod/pentapod.ini
./sim/axis/simtcl/twopass_basic.ini
./sim/axis/simtcl/twopass_compat.ini
./sim/axis/corexy/corexy_by_hal.ini
./sim/axis/corexy/corexy_by_kins.ini
./sim/axis/random_tc.ini
./sim/axis/ngcgui/ngcgui_simple.ini
./sim/axis/ngcgui/ngcgui.ini	韩素	失败	`_tkinter.TclError: bad menu entry index "Show pyVCP panel"`
./sim/axis/ngcgui/ngcgui_lathe.ini	韩素	失败	`_tkinter.TclError: bad menu entry index "Show pyVCP panel"`
./sim/axis/ngcgui/ngcgui_gcmc.ini	韩素	失败	`_tkinter.TclError: bad menu entry index "Show pyVCP panel"`
./sim/axis/ngcgui/pyngcgui_axis.ini
./sim/axis/rose_engine/rose_engine.ini
./sim/axis/canterp.ini
./sim/axis/foam/axis_foam.ini
./sim/axis/wrapped_rotary/wrapped_rotary.ini
./sim/axis/moveoff/7_pyvcp.ini
./sim/axis/moveoff/6_zretract.ini
./sim/axis/moveoff/4_always_external.ini
./sim/axis/moveoff/3_always_local.ini
./sim/axis/moveoff/1_onpause_local.ini
./sim/axis/moveoff/5_no_gui.ini
./sim/axis/moveoff/8_gladevcp.ini
./sim/axis/moveoff/2_onpause_external.ini
./sim/axis/profile_axis.ini
./sim/axis/historical_lathe.ini
./sim/axis/axis_mm.ini
./sim/axis/lathe-fanucy/车床-fanucy.ini
./sim/axis/orphans/medium.ini
./sim/axis/orphans/axis_noio.ini
./sim/axis/orphans/iocontrol-removed/iocontrol-removed.ini
./sim/axis/orphans/acc_test.ini
./sim/axis/axis.ini	菲尔·卡特	经过
./sim/axis/lathe.ini
./sim/axis/db_demo/db_ran.ini
./sim/axis/db_demo/db_nonran.ini
./sim/axis/xhc-hb04/xhc-hb04-layout2_mm.ini
./sim/axis/xhc-hb04/xhc-hb04-layout2.ini
./sim/axis/xhc-hb04/xhc-hb04-layout1.ini
./sim/axis/vismach/hexapod-sim/hexapod.ini
./sim/axis/vismach/rolfmill/rolfmill.ini
./sim/axis/vismach/puma/puma560.ini
./sim/axis/vismach/puma/puma_cube.ini
./sim/axis/vismach/puma/puma560_uvw.ini
./sim/axis/vismach/puma/puma.ini
./sim/axis/vismach/VMC_toolchange/vmc_index.ini	安迪普	经过
./sim/axis/vismach/VMC_toolchange/vmc_graycode.ini	安迪普	经过	graycode 不太正确
./sim/axis/vismach/3axis-tutorial/3axis-tutorial.ini
./sim/axis/vismach/hbm/hbm.ini
./sim/axis/vismach/melfa-sim/melfa.ini
./sim/axis/vismach/5axis/table-rotary-tilting/xyzbc-trt.ini
./sim/axis/vismach/5axis/table-rotary-tilting/xyzac-trt.ini
./sim/axis/vismach/5axis/bridgemill/5axis.ini
./sim/axis/vismach/5axis/max5/max5triv.ini
./sim/axis/vismach/5axis/max5/max5kins.ini
./sim/axis/vismach/millturn/millturn.ini
./sim/axis/vismach/scara/scara.ini
./sim/axis/ini_hal_demo.ini
./sim/axis/extrajoints/12extrajoints.ini
./sim/axis/extrajoints/1extrajoint.ini
./sim/axis/extrajoints/2extrajoints.ini
./sim/axis/iocontrolv2/m66track.ini
./sim/axis/iocontrolv2/axis-iocontrolv2-demo.ini
./sim/axis/iocontrolv2/owordm6-ui.ini
./sim/axis/iocontrolv2/g8812.ini
./sim/axis/iocontrolv2/owordm6-ui-ns.ini
./sim/axis/histogram_demo.ini
./sim/axis/gladevcp/gladevcp_panel.ini
./sim/axis/gladevcp/set-param-from-ini.ini
./sim/axis/gladevcp/gladevcp_panel_tester.ini
./sim/axis/gladevcp/gladevcp_tab.ini
./sim/axis/gladevcp/probe.ini
./sim/axis/axis_9axis.ini
./sim/axis/remap/cycle/cycle.ini
./sim/axis/remap/rack-toolchange/racktoolchange.ini
./sim/axis/remap/getting-started/demo.ini
./sim/axis/remap/extend-builtins/extend-builtins.ini
./sim/axis/remap/stop-lookahead/demo.ini
./sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini
./sim/axis/lathe_multispindle/lathe.ini
./sim/qtvcp_screens/qtdefault_gantry.ini
./sim/qtvcp_screens/qt_gantry.ini
./sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini
./sim/qtvcp_screens/qtdefault.ini
./sim/qtvcp_screens/qtdefault_mm.ini
./sim/qtvcp_screens/industrial_lathe_wear/industrial_lathe_wear.ini
./sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini
./sim/qtvcp_screens/qtx1mill.ini
./sim/qtvcp_screens/qtaxis.ini
./sim/qtvcp_screens/啄木鸟/啄木鸟_xyza.ini
./sim/qtvcp_screens/啄木鸟/啄木鸟_xyzya.ini
./sim/qtvcp_screens/啄木鸟/啄木鸟_xyzy.ini
./sim/qtvcp_screens/啄木鸟/woodpecker_xyz.ini
./sim/qtvcp_screens/啄木鸟/woodpecker.ini
./sim/qtvcp_screens/qtaxis_mpg.ini
./sim/qtvcp_screens/qt_800x600.ini
./sim/qtvcp_screens/qtdefault_9axis.ini
./sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini
./sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini
./sim/qtvcp_screens/qtvcp_experimental/gremlin.ini
./sim/qtvcp_screens/qttouchy/qttouchy.ini
./sim/qtvcp_screens/blender.ini
./sim/qtvcp_screens/tester.ini
./sim/qtvcp_screens/qtdragon/qtdragon_xyzya.ini
./sim/qtvcp_screens/qtdragon/qtdragon.ini
./sim/qtvcp_screens/qtdragon/qtdragon_xyza.ini
./sim/qtvcp_screens/qtdragon/qtdragon_hd.ini
./sim/qtvcp_screens/qtdragon/qtdragon_xyzy.ini
./sim/qtvcp_screens/qtdragon/qtdragon_xyz.ini
./sim/qtvcp_screens/qtdragon/qtdragon_auto_tool_probe.ini
./sim/qtvcp_screens/qtdragon/qtdragon_xyyz.ini
./sim/gscreen/silverdragon/silverdragon.ini	汉斯	失败	`** GSCREEN INFO: Using SKIN glade file from /home/cnc/linuxcnc/linuxcnc-dev-master/share/gscreen/skins/silverdragon/silverdragon.glade ` `gtk-builder-error-quark: /home/cnc/linuxcnc/linuxcnc-dev-master/share/gscreen/skins/silverdragon/silverdragon.glade:266:50 Invalid property: GtkNotebook.tab_border (11)` `** Gscreen GLADE ERROR: With main screen xml file: /home/cnc/linuxcnc/linuxcnc-dev-master/share/gscreen/skins/silverdragon/silverdragon.glade`
./sim/gscreen/gscreen_custom/9axis.ini	汉斯	失败	参见 sim/gscreen/gscreen_custom/industrial.ini
./sim/gscreen/gscreen_custom/industrial.ini	汉斯	失败	`** GSCREEN INFO: Using SKIN glade file from /home/cnc/linuxcnc/linuxcnc-dev-master/share/gscreen/skins/industrial/industrial.glade ` `gtk-builder-error-quark: /home/cnc/linuxcnc/linuxcnc-dev-master/share/gscreen/skins/industrial/industrial.glade:20:55 Invalid property: GtkStatusbar.has_resize_grip (11)` `** Gscreen GLADE ERROR: With main screen xml file: /home/cnc/linuxcnc/linuxcnc-dev-master/share/gscreen/skins/industrial/industrial.glade`
./sim/gscreen/gscreen_custom/tester_metric.ini
./sim/gscreen/gscreen_custom/gscreen_gaxis.ini
./sim/gscreen/gscreen_custom/gaxis_no_plot.ini
./sim/gscreen/gscreen_custom/tester.ini
./sim/gscreen/industrial_lathe_wear/industrial_lathe_wear.ini
./sim/gscreen/ngcgui/pyngcgui_gscreen.ini
./sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini
./sim/gscreen/gscreen.ini	汉斯	失败	打开机器时窗口宽度从 840 像素增加到 1760 像素
./sim/gscreen/spartan/spartan.ini	汉斯	失败	`(gscreen:2352): Gtk-WARNING : 11:42:44.635: Could not load image '../gscreen/images/spindle_cw.gif'` `gtk-builder-error-quark: /home/cnc/linuxcnc/linuxcnc-dev-master/share/gscreen/skins/spartan/spartan.glade:5058:51 Invalid property: GtkStatusbar.has_resize_grip (11)` `** Gscreen GLADE ERROR: With main screen xml file: /home/cnc/linuxcnc/linuxcnc-dev-master/share/gscreen/skins/spartan/spartan.glade`
./sim/gscreen/gscreen_mm.ini	汉斯	失败	参见 sim/gscreen/gscreen.ini
./sim/gscreen/gscreen_lathe.ini	汉斯	失败	参见 sim/gscreen/gscreen.ini
./sim/pyvcp_demo/pyvcp_bottom_panel.ini
./sim/pyvcp_demo/pyvcp_demo1.ini
./sim/touchy/touchy.ini	安迪普
./sim/touchy/ngcgui/pyngcgui_touchy.ini	安迪普
./sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini	安迪普
./sim/touchy/ngcgui/pyngcgui_touchy_moveoff.ini	安迪普
./sim/touchy/gladevcp/touchy.ini	安迪普
./sim/touchy/gladevcp/gladevcp_touchy.ini	安迪普

phillc54

我开始查看 by_machine 配置，其中有不少需要硬件。

我想我们可以假设任何使用 Axis 作为 GUI 的配置都可以通过。

安迪普

也许对那些需要特定硬件的人添加评论？
我认为 sim 配置是第一要务。

蛋糕糊

关于“按机器”，可能还有“按接口”类别，但如果我的评论不能接受，请原谅我。

对于其中的许多人，我不知道它们是否相关了。

cooltool – 他们现在似乎正在运行一个 beaglebone/machinekit 控制器，它看起来是由一个 machinekit 人员维护的

铁匠铺 – 我以前不知道情况，但他们似乎不再出售任何 cnc

sherline – 我认为他们的新产品使用的是 masso 控制器，但他们似乎仍在销售 linuxcnc 设置，而不是 narc，但他们也销售 debian/lcnc 发行光盘（我不知道这是怎样的），如果有人与他们联系，也许我们会要求他们提供工作配置或测试示例配置

编辑，sherline 在 2022 年 4 月发布了这个视频，视频显示他们使用 linuxcnc，但在视频中他们仍在使用 mini gui（这在 IMO 上非常好），但自 2.7
https://www.youtube 以来就没有用了。 com/watch?v=3wTnnJRBBDE

tormach – 既然他们有了 pathpilot，他们甚至还支持 linuxcnc 配置吗？

通过接口，显然 paraport、pico 和 mesa 仍然相关，但其他的呢？

筒仓

乐伦。2022 年 6 月 20 日 à 02:20，cakeslob ***@***.***> a écrit :

关于“按机器”，可能还有“按接口”类别

如果得到确认，我会在未来的版本中删除之前为 2.9 提出弃用通知，这意味着支持终止。

安迪普

Smithy 的链接是 Matt Shaver，我认为他是在 Smithy 工作时在 NIST 发现 EMC2 的那个人。
不过，他们似乎不再运送任何由 LinuxCNC 控制的东西。

这可能需要向开发人员邮件列表发送电子邮件，也许添加配置的人可以在其中说明它们是否仍然相关。

测试所有示例配置#1762

注释