嗨，
我是 GRBL -UGCS 的新手。
我已经通过以下方式清除了我的 Arduino：
/*

• EEPROM 清除
  *
• 将 EEPROM 的所有字节设置为 0。
• 此示例代码属于公共领域。

*/

包括 <EEPROM.h>

void setup()
{
// 将 0 写入 EEPROM 的所有 512 个字节
for (int i = 0; i < 512; i++)
EEPROM.write(i, 0);

// 完成后打开 LED
digitalWrite(13, HIGH);
}

无效循环（）
{
}

然后用 Xloader 我上传了“grbl_v0.9g_atmega328p_16MHz_115200.hex”

当我打开 UGCS 时，我会继续在控制台屏幕中看到以下几行，直到我关闭：
I removed the WORD IDLE before MPos

[详细]<,MPos:0.000,0.000,0.000,WPos:0.000,0.000,0.000>
[详细]<,MPos:0.000,0.000,0.000,WPos:0.000,0.000,0.000>
[详细]<,MPos:0.000 ,0.000,0.000,WPos:0.000,0.000,0.000>
[详细]<,MPos:0.000,0.000,0.000,WPos:0.000,0.000,0.000>
[详细]<,MPos:0.000,0.000,0.000,WPos:0.000 ,0.000,0.000>
**** 连接关闭 ****

可能是什么问题？？？？

谢谢