开源改变世界
> 推推 > 中期工作成功 #368

中期工作成功 #368

推推 grbl 3年前 (2023-02-05) 267次浏览
关闭
prak1111 打开了这个问题 2022 年 4 月 11 日 · 2 条评论
关闭

中期工作成功#368

prak1111 打开了这个问题 2022 年 4 月 11 日 · 2 条评论

评论

中期工作成功 #368

没有提供说明。
中期工作成功 #368
作者
普拉克1111 评论了 2022 年 4 月 11 日 • 

编辑 

你好，

试图运行雕刻工作。开始很好，突然停止打印，就在停止机器之前，它的行为就像挂起一样。Fluidnc 版本为V3.4.3。
日志-
<运行|MPos:520.638,727.270,-48.640|FS:600,10000|SD:31.70,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:527.213,720.200,-49.320|FS:600, 10000|SD:31.83,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:535.287,714.945,-50.400|FS:600,10000|SD:31.98,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:544.763,712.615,-49.380|FS:600,10000|SD:32.08,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:554.263,710.625,-47.620|FS:600,10000|SD: 32.17,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:562.425,706.315,-44.660|FS:326,10000|SD:32.29,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:561.700,708.660,-40.480|FS:1187,10000|Ov:100,100,100|A:S|SD:32.31,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:552.838,729.495,- 40.480|FS:1271,10000|SD:32.31,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:550.838,734.210,-43.220|FS:300,10000|WCO:430.000,430.000,-44.500|SD :32.32,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:550.838,734.210,-48.200|FS:300,10000|SD:32.32,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos: 557.388,730.775,-46.560|FS:600,10000|SD:32.45,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:566.225,726.760,-45.020|FS:600,10000|SD:32.50,/ sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:569.537,725.250,-40.580|FS:110,10000|SD:32.55,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:564.187,741.455, -40.480|FS:1369,10000|SD:32.55,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:557.213,762.600,-40.480|FS:1369,10000|SD:32.55,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:554.812,769.880,-42.620|FS:300,10000| SD:32.57,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:554.812,769.880,-47.580|FS:300,10000|Ov:100,100,100|A:S|SD:32.57,/sd/PiNC// Aum_Sun_V25_new.nc>
<运行|MPos:556.750,764.860,-48.540|FS:600,10000|SD:32.68,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:560.763,756.170,-49.080|FS: 600,10000|WCO:430.000,430.000,-44.500|SD:32.80,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:566.362,748.400,-50.360|FS:600,10000|SD:32.93,/ sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:574.263,742.860,-49.440|FS:600,10000|SD:33.05,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:582.525,737.945, -47.640|FS:600,10000|SD:33.17,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:588.800,731.175,-44.760|FS:428,10000|SD:33.27,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:591.463,731.570,-40.480|FS:1119,10000| SD:33.30,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:617.737,742.530,-4​​0.480|FS:1239,10000|SD:33.30,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos :622.325,744.445,-43.260|FS:300,10000|SD:33.32,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:620.162,750.225,-46.560|FS:600,10000|Ov:100,100,100| A:S|SD:33.40,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:615.112,758.000,-48.900|FS:600,10000|SD:33.53,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:609.213,765.560,-50.240|FS:600,10000|WCO:430.000,430.000,-44.500|SD:33.63,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:605.025,774.140, -49.900|FS:600,10000|SD:33.81,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:603.450,783.510,-48.560|FS:600,10000|SD:33.90,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:592.013,807.615,-47.500|FS:600,10000| SD:34.36,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:584.763,812.685,-47.480|FS:600,10000|SD:34.55,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos :584.513,805.125,-47.520|FS:600,10000|SD:34.81,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:589.513,796.865,-47.520|FS:600,10000|SD:inf, /sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:589.687,796.490,-47.520|FS:600,10000|SD:inf,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:589.850,796.095 ,-47.520|FS:600,10000|Ov:100,100,100|A:S|SD:inf,/sd/PiNC//Aum_Sun_V25_new.nc>
<运行|MPos:590.263,795.030,-4​​7.520|FS:600,10000| SD:inf,/sd/PiNC//Aum_Sun_V25_new.nc>
[MSG:/sd/PiNC//Aum_Sun_V25_new.nc 文件作业成功]
ok
<Run|MPos:591.037,786.725,-47.520|FS:600,10000|WCO:430.000,430.000,-44.500>
<Run|MPos:589.050 ,777.910,-47.520|FS:600,10000>
<空闲|MPos:587.638,770.495,-47.480|FS:0,10000>
<空闲|MPos:587.638,770.495,-47.480|FS:0,10000>
<空闲|MPos:587.638,770.495,-47.480|FS:0,10000>
<空闲|MPos:587.638,770.495,-47.480|FS:0,10000>
<空闲|MPos:587.638,770.495,-47.480|FS:0, 10000>
<空闲|MPos:587.638,770.495,-47.480|FS:0,10000>
<空闲|MPos:587.638,770.495,-47.480|FS:0,10000|Ov:100,100,100|A:S>
<空闲|MPos :587.638,770.495,-47.480|FS:0,10000>
<空闲|MPos:587.638,770.495,-47.480|FS:0,10000|WCO:430.000,430.000,-44.500>
<空闲|MPos:587.638,770.495,-47.480|FS:0,10000>
<空闲|MPos:587.638,770.495,-47.480|FS:0,10000>
<空闲|MPos:587.638,770.495,-47.480|FS: 0,10000>
<空闲|MPos:587.638,770.495,-47.480|FS:0,10000>
<空闲|MPos:587.638,770.495,-47.480|FS:0,10000>
<空闲|MPos:587.638,770.495,- 47.480|FS:0,10000>
<空闲|MPos:587.638,770.495,-47.480|FS:0,10000>
<空闲|MPos:587.638,770.495,-47.480|FS:0,10000|Ov:100,100,100|A: S>

配置文件-

board: "ESP32 Controller V4"

stepping:
  engine: RMT
  idle_ms: 255
  dir_delay_us: 2
  pulse_us: 2
  disable_delay_us: 1

axes:
  shared_stepper_disable_pin: gpio.13:low
  
  x:
    steps_per_mm: 80
    max_rate_mm_per_min: 1800
    acceleration_mm_per_sec2: 50
    max_travel_mm: 1840
    soft_limits: false
    
    homing:
      cycle: 2
      mpos_mm: 0
      feed_mm_per_min: 600.000
      seek_mm_per_min: 1000.000
      positive_direction: false
    
    motor0:
      limit_neg_pin: gpio.17:high:pd
      pulloff_mm: 3.0
      standard_stepper:
        step_pin: gpio.14
        direction_pin: gpio.2

  y:
    steps_per_mm: 200
    max_rate_mm_per_min: 1300
    acceleration_mm_per_sec2: 50
    max_travel_mm: 900
    soft_limits: false

    homing:
      cycle: 2
      mpos_mm: 0
      feed_mm_per_min: 600.000
      seek_mm_per_min: 1000.000
      positive_direction: false
    
    motor0:
      limit_neg_pin: gpio.4:high:pd
      pulloff_mm: 3.00
      standard_stepper:
        step_pin: gpio.26
        direction_pin: gpio.15:low

  z:
    steps_per_mm: 50
    max_rate_mm_per_min: 500
    acceleration_mm_per_sec2: 50
    max_travel_mm: 80
    soft_limits: true

    homing:
      cycle: 1
      mpos_mm: 0
      feed_mm_per_min: 300.000
      seek_mm_per_min: 400.000
      positive_direction: true
    
    motor0:
      limit_pos_pin: gpio.16:high:pd
      pulloff_mm: 3.0
      standard_stepper:
        step_pin: gpio.27
        direction_pin: gpio.33:low
              
spi:
  miso_pin: gpio.19
  mosi_pin: gpio.23
  sck_pin: gpio.18

sdcard:
  cs_pin: gpio.5
  card_detect_pin: NO_PIN

probe:
  pin: NO_PIN

control:
  feed_hold_pin: gpio.21:high:pd

start:
  must_home: true```
中期工作成功 #368
作者

您好，
问题已通过先刷蓝牙固件然后刷 wifi 解决。
早些时候它运行良好，我用 OTA 更新了固件，它在中期开始完成工作。
谢谢。
喜欢 (0)