注释
|
亲爱的 BlueOrangeLive， name: LaserSB42B_OLED_3
board: unknown
kinematics:
stepping:
engine: RMT
idle_ms: 255
dir_delay_us: 0
pulse_us: 5
disable_delay_us: 0
axes:
shared_stepper_disable_pin: gpio.26
x:
steps_per_mm: 102.400
max_rate_mm_per_min: 10000.000
acceleration_mm_per_sec2: 1000.000
max_travel_mm: 287.000
soft_limits: true
homing:
cycle: 2
mpos_mm: 0.000
positive_direction: false
settle_ms: 25.000
seek_mm_per_min: 5000.000
feed_mm_per_min: 500.000
seek_scaler: 1.100
feed_scaler: 5.000
motor0:
limit_all_pin: gpio.36:low
hard_limits: false
stepstick:
direction_pin: gpio.33:low
step_pin: gpio.25
motor1:
null_motor:
y:
steps_per_mm: 128.000
max_rate_mm_per_min: 10000.000
acceleration_mm_per_sec2: 1000.000
max_travel_mm: 398.000
soft_limits: true
homing:
cycle: 2
mpos_mm: 0.000
positive_direction: false
settle_ms: 25.000
seek_mm_per_min: 5000.000
feed_mm_per_min: 500.000
seek_scaler: 1.100
feed_scaler: 5.000
motor0:
limit_all_pin: gpio.39:low
hard_limits: false
stepstick:
direction_pin: gpio.27:low
step_pin: gpio.14
motor1:
null_motor:
z:
steps_per_mm: 256.000
max_rate_mm_per_min: 10000.000
acceleration_mm_per_sec2: 1000.000
max_travel_mm: 100.000
soft_limits: true
homing:
cycle: 1
mpos_mm: 0.000
positive_direction: false
settle_ms: 25.000
seek_mm_per_min: 5000.000
feed_mm_per_min: 500.000
seek_scaler: 1.100
feed_scaler: 5.000
motor0:
null_motor:
motor1:
null_motor:
spi:
miso_pin: gpio.19
mosi_pin: gpio.23
sck_pin: gpio.18
sdcard:
cs_pin: gpio.5
control:
feed_hold_pin: gpio.34:low:pu
coolant:
flood_pin: gpio.4:low:pu
delay_ms: 1000.000
probe:
check_mode_start: false
macros:
startup_line0:
startup_line1:
macro0:
macro1:
macro2:
macro3:
start:
must_home: true
check_limits: true
deactivate_parking: false
user_outputs:
laser:
tool_num: 0
speed_map: 0=0.0% 1000=100.0%
output_pin: gpio.17
enable_pin: gpio.16
disable_with_s0: false
s0_with_disable: false
pwm_hz: 5000
arc_tolerance_mm: 0.002
junction_deviation_mm: 0.010
verbose_errors: false
report_inches: false
enable_parking_override_control: false
use_line_numbers: false
|
.png "为 LaserSb42 翻译 Machine.h #1153"){kind=avatar}
Laser_SB42B_OLED_3.txt
此问题会自动将Grbl_Esp32 机器定义文件转换为FluidNC YAML 格式。
将标题中的 YOUR NAME 更改为标识您的机器配置的某个字符串。
在此处附加您的机器定义文件 – 但首先将 .h 扩展名更改为 .txt，因为 GitHub 不允许您附加具有 .h 扩展名的文件。提交问题，几分钟后，新评论将出现在 FluidNC YAML 文件中。
重要提示：附加文件 – 不要将文件文本粘贴到问题中。如果粘贴，转换器将无法工作。